What Does It Cost to Cool a Bedroom with a Mini Split.

Cooling a single bedroom in Central Texas with a ductless mini split costs $1,500 flat, including materials, labor, and a trip to Home Depot for touch-up paint. That price covers a new install, not repairs or service calls, and most jobs finish in one day.

Flat pricing, same everywhere we work

Every install is wired to code by our TDLR-licensed contractor. Long line-set runs, panel upgrades or unusual mounting can add cost, and we tell you up front, before any work starts. For market context, see our Austin mini split cost guide: typical Central Texas quotes run $3,000 to $5,000 for a single zone.

General sizing guide

General sizing guidance. Actual BTU needs vary with insulation, ceiling height, sun exposure and windows, which is why we confirm sizing against your specific space before quoting.

Why a Single Zone Mini Split for a Bedroom

A single zone mini split, rated at 9,000 to 12,000 BTUs, comfortably handles a typical 200 to 400 square foot bedroom. At $1,500 flat, this covers the unit, standard line set up to 25 feet, electrical hookup, and testing. The system is a heat pump, so it both cools through brutal Austin summers and heats during mild winters without a separate furnace. No custom quotes or in-home visits are needed for standard installs.

Industry custom quotes for ductless mini splits often range from $2,000 to $5,000 per zone, requiring a contractor to visit your home and measure. Our flat pricing eliminates that guesswork. For a single bedroom, $1,500 is the total you pay, not a starting estimate. Exceptions like a very long line set or a necessary panel upgrade are discussed honestly before work begins, never after.

What Drives the Cost Up or Down

The flat price assumes a straightforward installation: a standard wall or window penetration, a line set within 25 feet, and existing electrical capacity within 50 feet of the panel. Costs rise if the line set needs to be longer than 25 feet, if the house requires a panel upgrade it already needed, or if mounting is unusually difficult like brick or thick concrete. These exceptions are stated before work starts, so you know exactly what you are paying.

Every installation is performed by a TDLR licensed contractor. Most one to three zone installs finish in a single day, and the system is tested for cooling and heating before the crew leaves. This flat rate applies only to new installations, never to repairs or service calls. If you are adding a second bedroom zone later, the price for two splits is $2,500, still well below the typical per zone industry average.

Questions

Can I cool just one bedroom with a mini split without affecting other rooms?

Yes, a single zone mini split is independent. It only conditions the room where the indoor unit is installed. No ductwork connects it to other spaces, so you can cool one bedroom while leaving other rooms unconditioned.

Does the $1,500 flat price include the electrical work?

It includes a standard electrical hookup within 50 feet of the panel. If your panel needs an upgrade that the house already required, that is an honest exception discussed before work starts. Otherwise, the electrical work is part of the flat price.

What if my bedroom is larger than average, will the price change?

The flat price is based on the number of zones, not square footage. A 9,000 BTU unit suits most bedrooms. If your room requires a larger capacity unit, the price remains $1,500 as long as it is a single zone installation. The crew will select the appropriate size for the space.

We install across Central Texas. See the Austin mini split cost guide, full Central Texas service area or Austin mini split installation.