How Much to Cool a Loft Conversion in Central Texas.
A loft conversion in Central Texas needs efficient cooling, but ductwork is often impractical. Mini splits offer a solution with predictable pricing and no hidden quotes.
Flat pricing, same everywhere we work
| System | Flat price, installed | Included |
|---|---|---|
| One split (single room) | $1,500 | Indoor head, outdoor condenser, line set, standard electrical, all labor |
| Two splits | $2,500 | Everything above, two zones |
| Three splits | $3,500 | Everything above, three zones |
Every install is wired to code by our TDLR-licensed contractor. Long line-set runs, panel upgrades or unusual mounting can add cost, and we tell you up front, before any work starts. For market context, see our Austin mini split cost guide: typical Central Texas quotes run $3,000 to $5,000 for a single zone.
General sizing guide
| Space size | Typical BTU needed | Notes |
|---|---|---|
| Up to 250 sq ft | 9,000 | Small bedroom, office, closet-sized room |
| 250-350 sq ft | 12,000 | Standard bedroom or small living area |
| 350-550 sq ft | 18,000 | Larger living area, garage, bonus room |
| 550-700 sq ft | 24,000 | Open living area, larger garage or shop |
General sizing guidance. Actual BTU needs vary with insulation, ceiling height, sun exposure and windows, which is why we confirm sizing against your specific space before quoting.
Sizing a Mini Split for Your Loft Conversion
Most loft conversions in Austin and surrounding areas require between 6,000 and 12,000 BTUs of cooling capacity. A single 9,000 or 12,000 BTU mini split unit typically covers a 200 to 400 square foot loft, depending on insulation, ceiling height, and sun exposure. Larger or poorly insulated lofts may need a second zone, adding cost but improving comfort.
The flat pricing model simplifies budgeting. A single-zone install for a loft costs $1,500, while a two-zone system runs $2,500. These prices include the unit, line set, electrical hookup, and labor. No in-home quote is required unless the loft has unusual challenges, like a long line set or a needed electrical panel upgrade.
What Drives Loft Mini Split Costs Up or Down
Line set length is the most common variable. Standard installs assume a 25-foot line set, but lofts with outdoor units far from the indoor head may require longer runs, increasing material costs. Electrical work is another factor. If the existing panel lacks capacity, an upgrade may be necessary, though this is not included in the flat rate.
Mounting difficulty can also affect pricing. Lofts with vaulted ceilings or limited wall space may need custom brackets or ceiling cassettes, which are not part of the standard install. TDLR-licensed contractors complete most single-zone loft installs in a single day, but complex setups may extend the timeline. Honest exceptions are disclosed before work begins, not after.
Questions
Can one mini split cool a loft and an adjacent bedroom?
A single 12,000 or 15,000 BTU unit can sometimes cover both spaces if they are open and total under 500 square feet. Larger or closed-off areas typically need a two-zone system for consistent cooling.
Does the flat price include removing old window AC units?
No. The flat rate covers new mini split installation only. Removing old units or patching walls afterward is separate work, though crews can haul away debris for an additional fee if arranged in advance.
Will a mini split work if my loft has no existing ductwork?
Yes. Mini splits are ductless systems, making them ideal for loft conversions without existing ductwork. The flat pricing assumes no ductwork demolition or modification is needed.
We install across Central Texas. See the Austin mini split cost guide, full Central Texas service area or Austin mini split installation.
Get your quote.
Tell us your address and how many rooms. We confirm coverage and send a fixed, all-in price, usually the same day.
Get a Fixed Quote